Over 850 Saddles In Stock Ready To Ship! Save with Code TS2P

14.5" to 16" Billy Cook Arena Roping Saddle 2147

14.5" to 16" Billy Cook Arena Roping Saddle 2147

Product Details

“Billy
Additional Images | Click to Zoom



Billy Cook Arena Roping Saddle 2147


One of the few Billy Cook ropers that comes standard in their Chestnut color. Billy has designed this saddle on his rawhide covered wood tree with a strong on-tree full double rigging. Included is a matching rear flank and Billy Cook 27 stand cinch.

This saddle is built to the highest quality using skilled craftsman and even Billy himself.

You'll love the deep, hand tooled waffle pattern from the pommel to the fenders and everywhere in between.

A rawhide wrapped horn and twisted cantle binding give this saddle the signature Billy Cook look. And if that's not enough, everyone will know you're riding in a Billy Cook with stamped logos and silver caps everywhere you look.

Other features include the quilted seat, silver trim, rawhide roper stirrups, and half breed off billet.

Specifications

  • Tree: Rawhide covered wood FQH bars
  • Seat Size:14.5" - 16" quilted
  • Horn: 2 1/2" post
  • Swell: 13" hand tooled
  • Cantle: 4" rawhide laced
  • Rigging: Full double stainless steel
  • Skirts: Artificial wool lined
  • Skirt Length: 26" (14.5/15" seat ) | 28.5" (15.5/16" seat)
  • Stirrups: Roper rawhide laced
  • Pattern: Waffle stamped with waffle border
  • Finish: Chestnut
  • Weight: Approximately 37 lbs.


**Note: Saddle no longer comes with front cinch**

Although through the years many have tried to imitate Billy Cook products, even to the point of counterfeiting, THERE IS ONLY ONE GENUINE "BILLY COOK CLASSIC SADDLE" MANUFACTURER. HorseSaddleShop.com is happy to sell the Genuine Billy Cook saddles made in Sulphur, Oklahoma, owned by Mr. Billy Cook. There are other saddle manufacturers that sell their own Billy Cook saddles. If you buy a Billy Cook saddle be sure that it is manufactured in Sulphur, Oklahoma.

Western Saddle Seat Size Calculator

*NOTE FOR CHILDREN OR YOUTH SIZES SMALLER THAN 14" When measuring for a child's Western saddle, have them sit down in a chair. Once seated, use a measuring tape to measure the length of their upper leg from the knee to their rear. The saddle should be about 10% longer than the child's upper leg. For example: If the child's leg measures 9 inches, then the child's Western saddle should be 10 inches.

Please try our new seat sizing tool to find your size

Calculated Seat Size Shown Below

Please select your body shape:

Do you prefer a tighter Barrel Fit?

Are you fitting for a Tucker Saddle?

Calculated Seat Size:



There is a lot of room for personal preference with seat sizing, but as a general rule it is better to error on the side of ordering a seat size that is too large rather than erring on the side of a seat that will be too small.

Things to Consider

  • Tucker adds 1/2inch to their seat sizes (due to thick seat padding)
    16.5” Tucker = 16” normally

  • Barrel riders usually take 1” less on the seat size
    16” Trail Rider = 15” Barrel Rider

  • Ranch (slick seats) usually ride smaller (1/2inch seat size) so they don’t slide around
    16” is for most men, 15” for most women

  • Trail Saddles with High Cantles (5”) make the seat sizes feel smaller
    Trail Saddle with 5” cantle will feel smaller in the seat than one with a 3.5” cantle

  • English Saddles don’t convert exactly but often are 2” bigger
    18” English = 16” Western

  • Riders with inseams under 30” or 5’ tall and under often need custom cut fenders
    Tall riders with long legs but lighter weight may need custom cut fenders as well



Checking the Fit

  • General Guideline is about 3 fingers between your thigh and the swell.

Reviews

5 stars based on 4 reviews 

Recommended Accessories

Similar Products

This Qualifies for Free Shipping
bi2147
$2,994.00$2,470.05
Seat / Size
Trade in for a discount?
5 stars based on 4 reviews